Technical Diver Package #2. Salvo Regulators and Hollis Backplate, Harness and Wing! $949.00
Salvo SRX Second Stage
Details:
* Nitrox Ready Up to 40 %
* Pneumatically balanced design for superior performance at depth
* Diver adjustable control knob for gas flow adjustment
* Venturi control assist for excellent work of breathing
* Large oval exhaust valve for minimal exhalation effort
* Marine brass, stainless steel spring and pivot lever
Salvo SR2 First Stage
Details:
* Nitrox Ready Up to 40 %
* Balanced Diaphragm Environmentally Sealed (Cold Water Conditions)
* Two 7/16 high pressure ports and Five 3/8 low pressure ports
* Intermediate Pressure 135-140
* Swivel turret provides superior strain relief and hose routing
* 300 BAR DIN
* Repair Parts Available
Z Knife
In the early 1980's cave divers were in need of small, line-cutting devices. Since the application was strictly for cutting lines, they looked to other sports and adopted the parachute line cutter known as a Z-Knife. The Z-knife was a protected blade stored away in a pouch. Today, the pouches have evolved, but the knife is still the same one parachutists' use to cut away a chute. Sharper than a dive knife, the Z-Knife is preferred for cutting through monofilament and braid line. Compact and easy to stow, the Z-Knife is available in a 1-inch webbing mount (AC2059-1) and vertical 2-inch webbing mount (AC2059-2). A nylon clip offers an alternative attachment point or the Z-Knife is easily stored in any pocket. A quick-release Velcro tab holds the knife firmly in place.
X Series 55 - 55 lbs Cave Cut Bladder
With its non-bungee design and valves nicely located for doubles, the X Series bladder is compact, clean and perfect for use with a doubles rig.
Features
# 55 lbs. Lift capacity bladder
# 1000 denier CorduraTM w/ PU lamination outer shell & 15mm urethane internal bladder
# Streamlined design for reduced drag and passing through tight spaces
# Centrally located elbow to avoid tank valve/regulator interference
# Lower left pull relief valve
# No bungee
# Cam band slots
Solo with Aluminum Backplate
Designed to meet all the needs of demanding technical divers, the Solo Harness System is clean, simple, and foolproof!
Features Size Chart
# Streamlined design enhances comfort with less drag
# Continuous one piece harness system limits failure potential
# Stainless steel D-rings and cam buckle included
# Removable shoulder pads accept stainless steel D-rings
# Backplate sold separately
# System weight (harness only): 1lb (0.45kg)







Reply With Quote
Bookmarks